Remote Control 4 External Blinds Open and CloseQuestion:
I am wondering if you have a solution for multiple blind switches (4 external blinds) which operate on 240V. I would like to have a centralized remote system to control them open or close without going from one room to another. Can you suggest something as a solution? Thanks.
You can order 4 receivers for motor control model of S1FC-AC220 (remember to choose operating voltage as 240V before you confirm the order); 4 external magnetic antennas 0020909, which are respectively installed to each receiver for longer remote distance; and one long range remote transmitter CB-4.
As you see in the picture of remote, button A can be set to control motor of blinds forward direction; button C can be set to control reversal direction. Buttons B and D can be set to stop the rotation.
Connect live wire to terminal “L” and neutral wire to terminal “N”. Then connect three wires of blind motor to terminals “UP”, “COMMON” and “DOWN”.
Press button A, 4 motors of blinds rotate continuously in forward direction at the same time.
Press button B, rotation stops.
Press button C, 4 motors of blinds rotate continuously in reversal direction at the same time.
Press button D, rotation stops.
Online shop: www.carymart.com